| 1. | Research on microwave dielectric ceramics and composite perovskite structure
微波介质陶瓷和复合钙钛矿结构的研究 |
| 2. | Effect of excess pbo and mgo on the fabrication of pmn - pt relaxor perovskite structure phase
弛豫复合钙钛矿相合成的影响 |
| 3. | Pmn - pt with complex perovskite structure had been obtained successfully with precursor method by two steps
采用两步合成的工艺，成功地合成了复合钙钛矿结构pmn - pt 。 |
| 4. | It was identified that calcium titanate of perovskite structure is a highly efficient anticorrosion pigment for paints
结果发现具钙钛矿结构的钛酸钙是一种适用于油漆的高效防腐颜料。 |
| 5. | The pst thin films in which the perovskite structure primarily formed were fabricated successfully on ito / glass substrates by the sol - gel method
本文采用溶胶?凝胶技术在ito基板上成功制备了性能优越的多晶钛酸锶铅薄膜材料。 |
| 6. | The results showed that the suitable synthesis condition for pure complex perovskite structure should be appropriate addition of excess mgo and pbo
分析结果表明，采用添加适当过量的mgo和pbo方法，可以合成单一的复合钙钛矿相。 |
| 7. | Twenty seven kinds of the strontium - and magnesium - doped lagao3 solid electrolytes with the perovskite structure were prepared by means of solid state reaction
本课题通过固相反应法制备了27种钙钛矿结构的sr 、 mg掺杂的lagao _ 3固体电解质材料。 |
| 8. | Subsequently , relaxor complex perovskite structure pmn - pt had been fabricated under 900 for 4 hours from the homogenous mixture of precursor and pbo powder
以先驱体粉料和氧化铅为原料，采用900保温4小时的工艺，合成了单一复合钙钛矿相的pmn - pt 。 |
| 9. | Furthermore , we try to fabricate complex perovskite structure pmn - pt by the conventional mixed oxide , liquid phase inclosure technique and microwave calcinations method
同时也对直接固相合成法、液相包裹体法及微波合成工艺进行了相应的比较和探讨。 |
| 10. | After many studies and analysis , the optimum processes were obtained for preparing plct ( x ) nanometer - powders with pure perovskite structure by sol - gel technology using inorganic salts and singular metal alkoxide
采用sol ? gel制备技术，结合大量的研究和粉体制备技术分析，掌握了利用无机盐原料及单一金属醇盐制备完全钙钛矿结构plct ( x )纳米粉体的优化工艺。 |
